IN ASSOCIATION WITH

IN ASSOCIATION WITH

Sunday, February 17, 2008

Surface conduction Electron emitter display

The SED technology has been developing since 1987. The flat panel display technology that employs surface conduction electron emitters for every individual display pixel can be referred to as the Surface-conduction Electron-emitter Display (SED). Though the technology differs, the basic theory that the emitted electrons can excite a phosphor coating on the display panel seems to be the bottom line for both the SED display technology and the traditional cathode ray tube (CRT) televisions.





When bombarded by moderate voltages (tens of volts), the electrons tunnel across a thin slit in the surface conduction electron emitter apparatus. Some of these electrons are then scattered at the receiving pole and are accelerated towards the display surface, between the display panel and the surface conduction electron emitter apparatus, by a large voltage gradient (tens of kV) as these electrons pass the electric poles across the thin slit. These emitted electrons can then excite the phosphor coating on the display panel and the image follows.











The main advantage of SED’s compared with LCD’s and CRT’s is that it can provide with a best mix of both the technologies. The SED can combine the slim form factor of LCD’s with the superior contrast ratios, exceptional response time and can give the better picture quality of the CRT’s. The SED’s also provides with more brightness, color performance, viewing angles and also consumes very less power. More over, the SED’s do not require a deflection system for the electron beam, which has in turn helped the manufacturer to create a display design, that is only few inches thick but still light enough to be hung from the wall. All the above properties has consequently helped the manufacturer to enlarge the size of the display panel just by increasing the number of electron emitters relative to the necessary number of pixels required. Canon and Toshiba are the two major companies working on SED’s. The technology is still developing and we can expect further breakthrough on the research.



No comments: